Add a Sparkle to Your Fiat 500 Key Fob

Bring a bit of fun to your Fiat 500 Key Fob by adding these cute Silicone Covers. These covers are easy to put on, and you can snap them over your black cover.

The silicone covers shield the keys from dust, splashes and other contaminants. The silicone covers also make your keys appear more elegant. The signals generated by the remote control of your key are not hindered and work flawlessly even when the cover is on.

Protects your keys from dust and splashes

Add a stylish touch to your keys with this silicone cover. It perfectly fits around the key fob, and does not slip. It protects your keys from splashes and dust. The signals emitted by your key remote are not affected by the silicone cover, so you are able to use the buttons on your key fob as normal.

Accessorize your Fiat Punto Key Replacement Cost 500 with these funky covers in Grey and Black. They are perfect if your original key cover is starting to appear shabby, scratched or scratched. The covers are made from high-quality silicone. They come with two key rings so they can be swapped out in case you get bored of one color.

These covers are designed to replace the black stock key cover that comes with your vehicle. The covers won't work if you already have the original key cover.

Great look!

Fiat is an exclusive and renowned Italian brand and their cars have an amazing style that sets them apart from the crowd. These sparkly car key covers are an easy and enjoyable way to add some elegance to your keys without being too loud. They look great on your key fob, and can be used to refresh the look of a worn-out key.

The covers snap easily into place and are designed to replace the original black cover. It is a good idea to remove the previous cover before installing this.

They come in Grey as well as black. The fiat logo is visible on both. You can change it at any time! These are also great gifts for Fiat 500 drivers.

Easy to install

Fiat 500 key covers can be a great option to update your keys. They are available in a range of styles and colors, so you'll be able to find the perfect one to match your personality. The most appealing aspect is that they're easy to install, so you can install them yourself in about 10 minutes. You will require a screwdriver and some patience. The first step is to remove the previous cover from your key. The original cover needs to be removed prior to the replacement cover can be fitted.

After removing the old cover After removing the cover, you can use a flathead for prying the four major attachment clips off the passenger side of the fob assembly. These are highlighted in red on the picture below. Also note the locating tab slots shown in yellow that need to be disengaged in addition.

Replace the battery with a CR2032 coin cell battery. Make sure that the "+" positive side of the battery corresponds to the opening of the fob and that the -" negative side is facing toward the buttons made of rubber.

Reattach the mirror's passenger side cover by aligning the locating tabs. After you have done this, place the fob that is on the driver's side back in your vehicle and test it by pressing the push button on the front of the car key. If everything is working properly your car should start to turn on the parking lights, and the doors will automatically lock.

Easy to remove

fiat ducato key fob replacement 500 Key Covers can be an excellent option to update your key fob. They're easy to set up and have a distinctive appearance. They guard your key fob from scratches, smudges and dirt. To replace the cover, you first have to remove the previous one from your vehicle.

It's easy to accomplish this by pressing the "program fiat 500 key fob" red button on the front face of your key fob. By pressing the button, you will release an lever that permits you to slide out the switch for ignition on your key (1). After you have removed the keys made of metal you will see an unassuming silver metal switch that displays images of a padlock that are locked and unlocked beside it. This is the battery switch for the key fob. It is easy to replace the battery by turning the switch a quarter turn with a small flathead screwsdriver.

The key fob houses an embedded microchip that communicates with the Body Control Module. When you insert the key in your Fiat, it depresses a button on the ignition switch, which acts as an "key-in-ignition" reminder. The BCM can detect the transponder in the key fob, to verify that it's valid.

You can also add a sport design twin pack to your key covers to give it an interesting and unique look. These covers snap over the original cover. They are available in Cream or Silver. The key cover will only work only if the original black cover is removed from your key fob.