UPVC Window Handle Replacement

It's simple to replace a broken window handle using the appropriate tools. It is important to identify the handle's type and spindle length before buying an alternative.

Older uPVC window handles have a spur which protrudes and locks on the wedge striker for cockspur. They can be right or left-handed and have to be matched when replacing.

What kind of lock or handle do I have

There are a myriad of windows locks and handles made of upvc each with its own advantages and purposes. The type of handle you have will determine whether or not your locking mechanism is effective and if it is easy to open windows. Over time, and with regular use, the upvc handles on your windows may get worn out and damaged. This makes them less secure and less effective. In some cases they might even be completely removed. It is crucial to fix your window handles made of upvc immediately if you begin to notice them falling off. This will stop possible burglaries and ensure that your home is secure.

It's an easy task that anyone can complete. You'll require some basic tools, but with the proper knowledge, it's an easy task that will only take a couple of minutes. It is important to know the kind of handle or lock that you have on your window. This will help you choose the appropriate replacement.

Inline Espagnolette Handles

They are the most popular type of upvc handles and are usually located on the other side of your window. They have a flat design and feature an opening that is connected to the locking mechanism on the frame of the window when it is turned. Inline upvc handles feature an elongated spindle that runs through middle of the handle and into the window frame to operate the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are held to the frame of the window with a single screw and are less secure than other kinds of window handles.

Tilt and Turn Handles

In contrast to other upvc handles, tilt and turn handles can be turned to open the window and turned inwards to allow to let air flow in. They have a 7mm spindle on the back and are available in left and right-handed versions.

When buying replacement window panes upvc handles it is essential to check the spindle length since not all of them are the same size. Drop something in the middle of the hole to test the length. This is the maximum spindle length that will be suitable for your window.

What is the spindle?

uPVC window handles function similarly like doors. By turning the handle, you can open a latch in the frame. The latch opens the window, to allow it to be shut and opened. The handles can become damaged, especially if they're used frequently or subjected to harsh conditions. This can lead to the need to replace your uPVC handles for windows as they might not operate the window correctly for a long time.

There are many different kinds of uPVC handles that are available, comprising Espag, Cockspur and Spaded handle options. These handles are designed in a variety of ways to fit into uPVC frames. Each handle style uses an individual spindle to lock the window mechanism. It is crucial to know the type of handle installed on your uPVC windows so that you can replace it with the right one.

You can check what type of uPVC handle you are using by looking at the base section of your handle. A snap-in covers should be over the screw that holds the base of the handle in position. After removing this, you will be able see the screw that holds the base of the handle in position. Once both screws have been removed, you should be able remove the handle from the uPVC.

After removing the uPVC handle, carefully unscrew it from the locking mechanism. Make note of the length of the spindle, as you'll need to make sure that you buy one that is the same length as the original handle and locking mechanism.

The primary issue with window handle problems with uPVC is that the handle spindle gets worn-out and is unable to longer function properly with the locking mechanism. This could be due wear and tear from continuous use or a loosening of the locking mechanism or even corrosion that occurs over time. If this happens, you'll have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Over time and through everyday usage, window handles could become damaged or broken, and if this happens it is crucial to repair them as quickly as possible to ensure the security of your home. It is simple to replace a damaged or worn handle. The job can be accomplished in under one minute without the need for any special tools.

The first step in removing the old handle is to remove the screw situated on the top of the handle base. After this screw is removed, the handle will be removed from the base section. There will be a second screw that is located at the bottom of the handle base, and this can be removed too. Once both of these screws are removed, the handle can be removed completely from the base section of the window.

After the handle has been removed, take the new handle and align the fixing holes with the holes that are present in the window frame. There might be a small sticker or caps on the new handle, so take them off these if necessary and then screw the handle in the frame. Once the handle is in place, it is important to test whether it functions by turning the handle and making sure that the lock mechanism is activated.

Espag handles feature spindles that extend out of the handle and slots into the multipoint locking mechanism on the window frame. Cadenza windows have a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom bar crossmember.

Once you have installed the new handle, place the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle has been firmly fixed. The handle is now ready to use to use, so try opening and closing the window several times to make sure that it works well and securely.

How do I install the new handle?

It's not difficult to alter the handle on your windows made of uPVC. The procedure is simple. You'll need a screwdriver, and a bit of patience. First, make sure that the old handle is unlocked. Then remove any screws that are visible. You can also replace them with screw caps. After removing the handle, you'll need to record the length of the spindle that extends from the back. This is vital as it will determine what kind of handle you will need to purchase.

Espagnolette handles are the most popular type of handle used on uPVC windows. They have a spindle that is connected to the handle and acts as a locking mechanism inside the window frame. The handle releases the latch and allows the window to open. With time and regular use, espagnolette handles may become damaged or impaired which is why it is essential to find an alternative.

Cadenza handles are a different kind of uPVC window handle commonly used on tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism inside the window. They are more secure than espagnolette handle as they can only open from the inside. They can be replaced with the same method as espagnolette handles however you must ensure that the new handle has a curved blade, as opposed to flat ones.

After you have picked the right handle, simply align the new handle with the existing screw holes prior to screwing it into place. Then, put the screw covers on and test your new handle. You can do this by moving the handle back and forth from the locked position to the unlocked one several times. It might be worthwhile to speak with an expert to determine if you can resolve any issues. They can provide advice on how to solve the issue in a timely and efficient manner.