Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discreet & does not require additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence that can be up to 20 presses. This will then allow your vehicle to begin.

Simple PIN Code Change Process

With the rising rate of vehicle theft, many owners are seeking to improve their security. There are a variety of security products that are available for sale that range from tracking systems to alarms and immobilisers. Not all of them are equally effective in protecting your vehicle. A tracking system can help you locate your car if it is stolen however it cannot stop the crime. An immobiliser, on the contrary does exactly what it says on the tin: it shuts down the engine of your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your car.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be done via the indicator stalk or window buttons. In addition, there is also an app on mobile that acts as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is an excellent option if you want to give your car to valet parking or servicing. The immobiliser remains active.

The Ghost is an innovative and unique device that operates with your vehicle's buttons rather than as a separate unit. This means that it's not just a powerful security measure against theft from your vehicle but can also be transferred onto any other vehicles you may own, making it more valuable than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is a sophisticated security system that guards your vehicle from key cloning, hacking and ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus, which disables the engine. It can be plugged into the vehicle without the need for additional wiring and installed has been thoroughly tested to ensure that it is compatible with all vehicles. It is also resistant against jamming devices which are a typical method used by car thieves to bypass immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch ghost doesn't emit LED indications and uses the buttons on your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can even make this sequence as long as 20 presses to increase security. The iPhone app allows a single, authorised connection, with a pairing code that is unique to the ghost immobiliser problems and communication between the two is secured.

The Ghost also stops car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run if a valid PIN code is entered. It can be temporarily operated in valet or service mode (with parameters set, such as 30mph speed limit), so you can offer your vehicle to a valet or service without needing to enter a code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a specific code. The system can be turned off or on by using your smartphone app without the need for extra wires.

Standard factory immobilisers for automobiles function through an electronic transponder in the key that sends an electronic signal to the ECU. If the correct code is sent the car will start however, if the transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It protects you from hacking or key cloning and even key theft. The only way a thief could steal your vehicle is physically towing it away, and even then they wouldn't be able to drive it.

auto ghost immobiliser uses the buttons in your car, such as the indicator stalk as well as the steering wheel and door panels to generate a unique PIN code that is changeable that must be entered prior to you can drive. It does this without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also undetectable by equipment for diagnostics and Xn--oi2bj1bgty1t8ty.com/www/bbs/board.php?bo_table=bod703&wr_id=172392 does transmit radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code grabbing techniques to determine if a system has been installed.

In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost is covertly integrated into the vehicle, so it cannot be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm, which requires disarming via the use of a button sequence. This makes it an excellent alternative to an GPS tracking device, which can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You don't have to look far on social media for stories or videos of cars that have been stolen with the latest technology tools. This includes key-cloning and hacking devices that allow the vehicle to start without the original keys.

The Ghost immobiliser was designed to stop this and offer an extra layer of security to prevent your vehicle from being targeted by thieves. It works by creating an unique pin code push sequence using your existing buttons on the steering wheel, door panel, and centre console. The unique pin code is entered alongside your original key fob in order to stop the engine from getting started. The unique override pin is found on a black plastic card which you will receive following the installation. It is simple to remember because there are no LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can tell the type of security system you have installed. This makes it a great alternative to an alarm.

Unlike other security systems, which use a relay in engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to block a vehicle completely by sending a digital block to the ECU and auto engine.

These systems can also be connected to an analog alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They are also service/valet-mode compatible and a good alternative to a tracker if you are you are taking your car in for repairs to an electrical issue at the dealers.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen with no owner's keys. It is easier than ever before to take your joy and pride with the availability of key cloning tools & door lock picks. To prevent this from happening, we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been cloned or your vehicle has been hijacked.

It connects directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't utilize radio frequencies or a key fob. It cannot be detected using diagnostics or any other hacking device. It also prevents you from introducing the new ECU or key to circumvent the system, since only the PIN code allows the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, centre console and door panels. Before you can start your vehicle, you must enter a unique, changeable PIN code that can be as long as 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that is being designed. It will prevent your vehicle from being driven or started if you don't enter a PIN code before entering. If you are driving away with the device armed, an indicator will appear on your dashboard and flash continuously for approximately 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function normally. If you don't enter your PIN code at this point, the indicator will continue to flash and require another PIN code for every attempt to start your vehicle.