Protect Your Pride And Joy With The Ghost Immobiliser

ghost ii immobiliser Immobiliser can safeguard your prized item from theft. This system is discrete and doesn't require additional key fobs.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This will then allow the startup of your vehicle.

Simple PIN code Change Process

With the increasing rate of vehicle theft, many owners are seeking to improve their security. There are a variety of aftermarket security devices available, from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. A tracking system may help you locate your car if it is stolen, but it will not stop the crime. Immobilisers, on the contrary, does exactly what it says on the label: it shuts off the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your vehicle.

The ghost device uses the buttons on your car to create a unique sequence that must be entered to allow the engine to begin. This can be accomplished using the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This is a great solution if you want to give your car to valet parking or maintenance. The immobiliser will remain active.

The Ghost is a unique and innovative device which is used in conjunction with the buttons in your vehicle rather than as a separate unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used to secure any future vehicles you own. This makes it a much more cost-effective option than a traditional wheel lock.

Small, Ghost Immobiliser Problems weatherproof device

The Autowatch ghost immobiliser is an advanced security system that guards your vehicle from key cloning, hacking & ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU via the CAN data bus to disable the engine. It can be fitted into the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a popular technique that car thieves use to get around immobilisers.

The advantage of using CAN data is that it operates silently when compared to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques and cannot be identified by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique sequences for disarming. This sequence can be extended 20 or more presses for additional security. The iPhone app is limited to one connection, with the Ghost's unique pairing code. the Ghost. All communication between the two devices is secured.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine will only run only if a valid PIN is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service to be serviced without needing to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals to disable your car's system from going through its normal start-up routine until you input an individual passcode. The system can be turned on or off through your smartphone's app without the need for additional wires.

Standard factory immobilisers in automobiles function through a transponder built into the key that transmits a signal to the ECU. If the correct code is transmitted, the car will start however if the transponder is replaced with one from another vehicle the immobiliser won't recognize it. This allows the vehicle be stolen and then started. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It protects your car from hacking, key cloning and even key theft. Only by physically towing your vehicle away can thieves take it away and not be able to drive it.

Ghost Immobiliser problems makes use of buttons on your vehicle, such as the indicator stalk, steering wheel, and the door panels, to create a unique PIN code which must be entered in order to use your car. It does this without extra hardware, such as key fobs. It can take up to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, which means thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to detect that the security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is hidden within the vehicle so it can't be disabled or removed by thieves. It's even more difficult to get rid of than a car alarm that requires disarming with a button sequence. This makes it a great complement to an GPS tracking device which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't have to look too far on social media to see stories or even videos of vehicles that have been taken by car thieves employing the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original key fobs.

Our Ghost immobiliser fights this and gives you an additional layer of security to prevent your vehicle from being stolen in the event of being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel and the centre console. This unique PIN has to be entered in conjunction with your original key fob in order to stop the vehicle from getting started. The unique PIN for override can be found on the black card that you will receive following installation. It is simple to remember as there aren't any LEDs.

The device is hidden in the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can determine the type of security system you have installed. This makes it an excellent alternative to an alarm.

Contrary to other security systems which use a relay in engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to block a vehicle completely, by sending a digital block to the ECU and engine.

They can also be connected to an analog alarm, immobiliser or tracker. This must be specified prior to installation. They are also compatible with valet/service modes and is a great alternative to a tracker device when you bring your vehicle to the dealer to address an electrical issue.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen from owners without keys. It's now easier than ever to steal your pride and joy thanks to the availability of key cloning tools and door lock picks. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle has been stolen.

It communicates directly with your car's ECU (Engine Control Unit) through the data loop of CAN. It's completely silent as it doesn't use radio frequencies or a key fob. It cannot be detected using diagnostics or any other hacking device. It also protects you from adding the new ECU or key to circumvent the system, because only the PIN number allows the engine to be started.

The device is concealed inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can start your car, you must enter a unique and reversible PIN code up to 20 digits.

This is the very first aftermarket CAN-bus immobiliser for the market that was developed. It will stop your vehicle from being driven or even started in the event that you do not enter a PIN code first. If you are driving away with the device in motion, an indicator will appear on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate normally. If you don't enter your PIN in this moment the indicator will continue to flash and require a new PIN every time you try to start your car.