Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. However, if you have double pane windows that are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor, where they could be trampled.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need open the window so that you can access the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible to ensure your upvc window repair windows are waterproof and draught-proof.

uPVC handles may also loosen. This is typically caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. Fortunately, it's easy to fix a loose uPVC window handle yourself. The first step is to close the window and perform an experiment fit. The corners of the sash must align with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a fairly simple fix that can be done by any DIY expert. Depending on the severity of the issue the old caulking may need to be removed before a new layer can be put on. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it blows open with the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window, but it's easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to inadequate installation at the factory. This can often be resolved by sending us a photo on our website. We will be pleased to offer you advice.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and window repairs close more easily. It also decreases the possibility of a window sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 or Window repairs other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also be disaligned as a result of wear, causing an opening between the frame and sash. If they are beyond repair, it could be necessary to get them re-aligned. The interlock may also become disaligned. It is located on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace them.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will provide a great level of insulation and security for your home. However, it is important to recognize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than repair them. If you encounter any issues with your Upvc window you should consult an expert immediately.