Ghost Immobiliser Installation

Add a ghost immobiliser your car to safeguard it from thieves. Our TASSA-certified system is safe from hacking, key cloning, and bypassing the vehicle immobiliser.

The system is hidden within the wiring loom of your vehicle which makes it completely inaccessible to anyone who is looking. It is created by generating a pin code push sequence that is pushed through existing buttons on the steering wheel, door cards and central console.

No circuit cuts

It's not surprising that car owners are concerned about protecting the car they've worked so hard to buy. Traditional security devices, like alarms or wheel locks, are easily manipulated by thieves. A Ghost 2 immobiliser immobiliser is a very effective and efficient solution that operates in silence and can't be detected by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only accessible to you. The code can be changed at any time, and can have up to 20 digits depending on your preferences. It also has an emergency code you can use in the event of forgetting your PIN.

The ghost immobiliser can be used to prevent relay boxes from transmitting your car key's signal from inside your home, which would open the doors and begin the vehicle. It could even block advanced methods of stealing your vehicle, such as OBD port hacking. The device is tiny and weatherproof, meaning it's difficult to detect and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be fitted inside your car without permanent marks. It is ideal for those who plan to sell their vehicle in the near future. It's also much quicker and simpler to install than an original factory-fitted system.

The Autowatch Ghost Immobiliser fitting, a revolutionary technology, is a new generation device that prevents thefts of cars using contactless technology by connecting to a vehicle's CAN network and using the existing buttons to generate an unique PIN code. It is a discreet device that can be put in with no wires cut and does not require any additional key fobs. It can also be connected to the vehicle's original ECU and prevents thieves from gaining access to it using a new key or replacing the ECU with the use of a "relay". This system has been verified by TASSA and is able to be linked to an International Security Register. Owners will be able to rest easy knowing that their vehicle is protected from theft.

No scanning by RF

You'll want to secure your vehicle from theft when you have spent an enormous amount of money and spent a lot of time customizing it. Installing an immobiliser is among the best ways to stop theft. It will prevent your vehicle from beginning until you enter an individual code. Utilizing the buttons on your steering wheel and dashboard, you can create a PIN up to 20 digits long that is only known to you, and ensure that only you have access to your vehicle. It is also possible to set up a service and valet mode that allows you to start your car for a short period without having to enter the PIN code. This allows your technician to work on your vehicle without your presence. This is an excellent option for those who want to save time and make their lives easier.

A ghost immobiliser, a new generation device, connects to the CAN data network of your vehicle and uses the buttons on the dashboard and the steering wheel to create a PIN code. It is designed to be discrete, with no light or sound to give it away and can be placed anywhere on the vehicle without impacting the look of your pride and joy.

This stealthy system has been approved by TASSA and could lower your insurance costs. It also comes with the ability to track that allows you to locate your vehicle even if it has been stolen. This is especially useful when you own a unique, expensive vehicle that you've put time and effort to customize.

Autowatch Ghost, in conjunction with the iPhone application, allows you to remotely start your car when you've lost your PIN code or are unable get into your vehicle. This feature is perfect when you need to go on errands or pick up your kids but don't want to risk having someone else drive your car. It's also useful when you have to take your vehicle to a mechanic for maintenance or repair.

The Ghost has the advantage that it does not transmit or detect radio frequencies and is therefore undetectable by thieves using RF scanning and code grabbing techniques. It can also protect your vehicle from key duplicates, ECU swapping and other usual methods of car theft.

No key to cloning

Ghost immobilisers are an excellent option for protecting expensive vehicles and are designed to stop key copying. They work by preventing your car from starting until an additional PIN code is entered alongside the standard key fob. This makes it more difficult for thieves to steal the vehicle, Ghost Immobiliser Fitting and may even deter them from attempting. This is a good idea in the event that your vehicle has been extensively customized or if it is a rare model.

These immobilisers are linked to the vehicle's CAN data network and are completely hidden, meaning that their presence is not visible. It is also impossible for a burglar to locate the device using radio frequency scanning or code technology for grabbing. This means that a thief will need to wait longer to steal your vehicle.

A criminal will need to be aware of the unique pin sequence and the exact location of the ghost to avoid it. But, the pin code is specific to you and may be altered as many times as you like. The pin code is easy for you to remember but mathematically impossible for anyone else to work out. The engineer will also provide an emergency pin code in case you forget your pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any location of your vehicle. It works with all vehicles and fully customisable to match the appearance of your car. It is also easy to use and is affordable. The device can be moved to a different vehicle, as long as it is compatible with the new vehicle.

The CAN bus is compatible with other security features. For instance, it can detect damage to your vehicle and warn the owner. It can also shut down the engine if the car is tampered with. It also helps protect your vehicle from hacking and key cloning. It can also detect vibrations or contact with the vehicle. Additionally, it will alert the owner if the vehicle has been moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from hacking in to disable your alarm, turn off your key fob and create new keys. This technology is an improvement over the old methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing the battery.

The Autowatch Ghost is the first immobiliser for CAN bus in the world, guards against key-cloning, hacking and replica car theft. It doesn't use LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console, and door panels.

Modern thieves use diagnostics to identify circuit cuts on your vehicle and can bypass immobilisers that require a lot of wiring or are built into the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not able to be detected by professional diagnosis tools. It can even be fitted on vehicles that are fitted with anti-theft equipment.

A Ghost immobiliser has another major benefit: your car can only be started by someone who knows your PIN and physically has access to your vehicle. This is a significant benefit over traditional security systems which can be bypassed with simple cable manipulation, a screwdriver, or a universal remote controller.

If you forget your PIN, you can easily reset it with the emergency PIN override function on a mobile device or computer. This is useful if you need to start your car when it's been left in a garage, or Ghost Immobiliser Fitting a valet parking service.

The Autowatch Ghost 2 is the latest version of the product and is insurance approved by TASSA when installed by one of our authorised installers. It comes with an RFID fingerprint system that allows specific components to be identified, which will allow the return of stolen parts in the event that they are discovered, and can also be turned into a'service mode', which will allow the engine to start when your vehicle is in a garage or with a valet parking service however you have to enter your PIN code in order to exit the vehicle again.