Repairs to upvc window repairs Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will keep drafts and water from getting into your property until a professional is able to fix the window repairs. This also serves as an obstacle to stop intruders from getting into your home. If the gap between the window and the door is substantial, you may want to use a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a number of problems such as sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for fit. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on how serious the issue is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes have no debris inside them and that the sill pan is properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with an ease. They can be repaired by any skilled DIYer and are usually done within a few minutes.

Like any mechanical component hinges are prone to wear out over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.

Check that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrow on each hinge. This shows which way the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by improper installation in the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also crucial to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause a gap to form between the sash and the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it might be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, can also become misaligned, again it may be possible to give them a thorough clean, Upvc window Repairs however in some cases it might be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs windows made of upvc will provide excellent insulation and security for your home. It is essential to remember that all windows eventually wear out and it is cheaper to replace them rather than repair them. So, if you're having issues with your upvc windows, it's best to seek professional assistance immediately.