Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to locate some plastic spacers that assist the new pane to fit correctly into the frame of the window.

If you're planning to try to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor and could be trampled under.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window repairs Dorking. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window repairs Rochdale as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of issues like sliding. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. After that, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the fit of your window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, window repairs Rochdale but it could also be caused by the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and do an initial fitting. The corners of the sash need to align with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. When it comes to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double glazing repairs Wimbledon-glazed glass it is more likely that the issue is more related to the seal, not the frame. This can be easily corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze it could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It is very easy to replace a hinge on a window, but it's easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to offer suggestions.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become misaligned due to wear, which can cause an opening between the frame and sash. If they are damaged beyond repair, it may be required to realign them. The interlock may also become disaligned. This happens on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. It is essential to remember that all windows will eventually wear out and it may be cheaper to replace them instead of fixing them. If you encounter any issues with your window made of upvc, it's best to consult a professional as soon as possible.