UPVC Window Repairs

uPVC windows are energy efficient and aid in reducing heating costs. However, as they age problems may arise that require fixing. This could include damaged hinges, handles or locks.

DIY enthusiasts can fix wooden windows with ease. It is also less expensive than a brand new replacement window.

Cracks

Cracks and breaks can be a major problem. If they are not repaired, they can cause water infiltration as well as less effective protection against cold temperatures and the possibility of structural damage. It is important to find a local builder or repair service that specialises in the repair of uPVC frames and can demonstrate the skills, experience and uPVC window repairs tools needed to produce the best results. This will ensure that your shattered window is fixed before it gets worse and you don't have to replace your window glass or unit.

Small cracks in glass can be fixed by using a variety of home-based solutions. Super glue and masking tape are among the most popular products that will hold cracked glass in place for a while. For more severe cracks, the tape may need to extend past the crack on both sides for best results.

You can also use two-part epoxy to repair damaged or cracked glasses. This is available from most hardware stores and can be bought at a cost of around $10. Make sure your work area is properly prepared prior to mixing the epoxy. Also, make sure you have all the equipment necessary to complete the task.

If your lower or upper sash is difficult to raise it's because the cords on the sash weights are damaged. It's a simple repair that can be done using a ladder and a flathead screwdriver. Replacing a drip cap that has rot is a different repair that is done at home. The majority of home centers have a drip caps that are not rot free and can be easily nailed or caulked to be fixed. Make sure that the glass of double or triple-paned window isn't cracked. The reason for this is that the gasses in the space between the windows are responsible for improving the efficiency of the window. This should not be allowed to escape.

Water Leaks

If your uPVC window is leaking, it can ruin your interior and lead to costly repairs. Water leaks can also cause structural damage to your home and the growth of mold. To avoid damage, it's important to repair any issues caused by windows that leak as soon as possible.

A damaged sealant around window frames is a common reason for leaks. Using silicone caulking can help improve the condition of the seal back to normal and prevent water leakage. It's also important to check for gaps and cracks around the frame as well in the brick or stone walls surrounding your windows.

Another common reason for leaking windows is the drainage hole is blocked or a defective flashing. It's crucial to make sure the drainage holes are free and unclogged, especially after a heavy rainstorm. It's also a good idea to inspect the flashing on the bottom of your window and ensure it's sealed correctly.

It's also essential to make sure that your drip cap doesn't have any decay or is missing. A rotted drip cap or one that's not there can allow water from above to seep into your window and cause structural damage. Replacing the leaky drip cap is not a difficult task. It's as easy as purchasing the new one and nailing it into place.

It's an excellent idea to have your windows tested for water-tightness by a qualified. They can utilize a special tool to measure the water-tightness and strength of your windows and make sure they are in line with industry standards. If your windows fail the test, they will need to be replaced. This is a costly fix however it's worth it for the comfort and safety of your family.

Sagging

If your windows aren't closing properly, it could cause many problems, such as drafts, condensation and an increase in energy bills. It could also indicate that the windows were not installed correctly or that the sealant is worn out. There are fortunately, a few ways to fix the issue.

The first step is to prepare your workspace in a space with plenty of natural light to help repair your window properly. Begin by laying out newspaper or an old blanket to shield your flooring from any splinters or drips from the windows as you work.

You should also make use of a white cloth that has been submerged in a solution containing detergent and water. This will prevent any stains of color appearing on your windows. If you're ready to start working on your uPVC windows, begin by making note of the location where the hinge channel needs to be situated. Then unscrew the channel from the frame and fill the screw holes using epoxy (for uPVC windows) or wood filler (if your frames are constructed from wood). Make sure you smooth the hole that you have filled before it sets.

Install the hinge channel once the holes are filled. Make sure it's aligned with the window jamb, and make sure you drill the new screw holes about a quarter inch from the original locations.

Then, take a measurement of the spindle that protrudes from the underside of your handle. You can request a replacement or bring it to a local hardware store to find a suitable replacement. Then, take out the setscrew on the shaft of the operator and smooth it out so that the set screw can lock onto the shaft (photo). Now, your uPVC windows should shut without a hitch.

Broken Hinges

You will have difficulty opening or closing your uPVC windows when the hinges are damaged or not working correctly. This could be a security risk and could also hinder your home from being warm or cold. It's simple to find an entirely new hinge for your upvc window repair windows. It's essential to ensure that you have the correct hinge for your windows.

This is because the hinges have to be the same width to fit in the frame of the window. The most popular type of hinge used in Upvc windows is an 15mm or 18mm UPVC window hinge. There are also specialised hinges for wooden frames. Choosing the correct window hinge for your windows can help you avoid the typical issues that homeowners face with their windows, such as not closing properly.

The hinges of your window may be loose or stiff due to a variety of reasons. The hinges might not be tightened enough. To check this, use a screwdriver to locate the friction screw on the end of the hinge. Loosen it. Then, you can adjust it by turning it either way.

Contact Preston Glass Fix if your UPVC window's hinges don't work correctly. We can offer an immediate fix. Our experts will assess the condition of your window hinges and provide you with the best option for you. We can repair or replace your window hinges or retension them, or even install new locking mechanisms to ensure that your UPVC Windows are secure and safe.

Faulty locks

UPVC window mechanisms and locks are an essential component of security for your home. They make it difficult to open windows without breaking into the home. When a lock fails, it can be a frustrating experience, but it is a quick and simple fix and you don't need to replace the whole window.

It's often an issue that is minor and could have been easily avoided with regular maintenance. We suggest that you have your uPVC window cleaned regularly as part of our yearly maintenance plan to reduce the likelihood of any problems.

The majority of modern uPVC windows come with espagnolette locks which operate by pushing the nose of the handle across a wedge block and then turning the handle to close the lock. They are effective in locking the window, however if they are not maintained correctly, over time they can begin to fail. We recommend applying WD-40 to them a few times a year.

If you notice that your uPVC windows don't open and shut as easily as they used to, or If the lock isn't functioning properly, it is likely that there is an issue with the locking gearbox inside the window frame. It can be difficult to access because it requires removing the seals around the frame of the window and then taking the handle off.

A locksmith who is skilled in UPVC repair will be able to diagnose this fault quickly, and then replace the malfunctioning locking mechanism with an exact replacement. This quick and simple fix can save you hundreds by avoiding the need to purchase new windows.