Repairs to uPVC Windows

Upvc Window repair is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need to locate some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards will fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is large, you may be interested in the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable and UPVC Window Repair energy efficient alternative to timber sash window. As time passes, they may be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it can also be caused by the handle mechanism getting worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. You'll first need to close the window and perform an initial fitting. The corners of the sash must be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is important to act if you get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in an ease. These are easily repaired by any skilled DIYer and can usually be done within a few minutes.

Most households in the UK will have either top hung or side-hung upvc window repair windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to give assistance.

It is also important to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear could become misaligned. This will cause a gap to form where the sash joins the frame. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them realigned or replaced. The interlock may be disaligned. This happens on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will help block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to recognise that all windows have a life span and eventually, they will reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional immediately.