Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows, double Glazing repairs Wellingborough it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double glazing repairs Canterbury panes are held together by internal beading, it will be more difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sagging. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window repairs Epsom is beginning to sag it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need to open the window to get to the frame. After that, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you cannot reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the mechanism of the handle getting worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is essential to act if you get up each morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leak originates from the glass of your double glazing Repairs Wellingborough glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it blows open with the breeze. They can be replaced by any competent DIYer and can usually be completed in just a few minutes.

Like any mechanical part hinges will wear out over time. The process of replacing a hinge on a window is essentially a very simple process but it can be simpler if you have someone to help hold the frame in place.

Check that the uPVC hinges are open and closed in the correct direction. This can be done by checking for the arrows on each hinge. This shows which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to inadequate installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to provide assistance.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges, also due to wear and tear may become displaced, which can cause gaps to develop where the sash meets the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock, which is on the hinge side of the window, may also be misaligned, and again it is feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are typically made of fabric filled with some kind of filler. They can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. However, it is important to recognize that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are having issues with your upvc windows, it's best to seek professional assistance as soon as possible.