Window Repairs

Window repairs can save homeowners money and help keep their homes warm. Window replacement may be necessary in the event of serious damage, such as broken glass or a shattered window frame.

Many other issues can be fixed to extend the life of windows. Some common issues include:

Cracked or broken panes

Cracked windows could be caused by a lawnmowers that throws errant rocks or by a tree branch being blown by strong winds. This is not only visually terrible, but it could cause higher energy bills because broken glass lets cold air into your home. It's fairly easy to fix windows with damaged panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may have to use an utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood with a soft cloth or window repairs paper towel.

After cleaning the area, apply silicone caulking that is water-proof around the frame's perimeter. This will prevent water from getting into the frame through the crack and cause further damage.

A crack that is severe in double-paned glass may cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is significant enough to threaten the quality of the glass or the glass has an inner pane that's completely missing, it might be time to contact an expert.

Cracks caused by thermal stress can occur when there's a significant difference in temperature between the outside and inside of your home, causing the glass to expand or contract. If this happens on two windows it's best to replace the window instead of attempting to repair it.

For cracked windows that aren't yet ready to be replaced clear tape can do a good job of preventing the crack from spreading and preventing bugs from entering cold air. You can also cut an area of nylon stocking or tarp sufficient to cover the crack, and fix it with duct tape. This isn't a permanent solution however it's a great solution in a pinch and keeps insects and cold air out of your home. If you notice cracks on the windows of your old ones it is recommended to contact your local business to determine whether replacing the entire window is the best option.

Rotten Wood

Wood rot is a common issue with windows. It can degrade a house's appearance and pose a safety danger. It is possible to repair damaged wood. You will first need to identify the cause of the wood decay. Check for roof leaks and other areas where water can enter the wood.

Next, Window Repairs you will need to get rid of any rotten areas of the upvc window repairs frame. This can be done using an axe, a claw hammer, or rasp. After the rotten areas have been removed it is time to replace them with new wood. It is recommended that you use pre-treated wood for this project since it is resistant to rot. If you cannot replace the damaged timber then you can use wood filler and hardener to strengthen the damaged area. Many hardware stores will carry this type of product. To get the best results, adhere to the instructions on the product label.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. This can be done by applying an water-resistant wood sealant. Sikkens, for example is a great one to apply.

You can also use a two-part epoxy filler to shield the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. However, it is important that you adhere to the instructions for application on the label. When the epoxy filler is dry you can sand the surface of the wooden. It is best to start with a rough layer of sandpaper and then move to a smoother one.

You do not want to expose the damaged part to further moisture. It is a good idea that's why you should cover the surface repaired with an oil-based primer which will shield it from water. Then, you can apply the wood sealant, which is waterproof.

The W won't open

There are a variety of reasons windows won't open. The house could have settled, or the wood frames could have warped during wet weather. Somebody may have put them in place to protect themselves. With a little patience and the right tools you can open most stuck windows.

One of the most frequent causes of a window that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges and locks. Metal hardware may also rust if it comes into contact humidity and direct sunlight. Spray grease on these areas to help to prevent oxidation and help keep your windows operating properly.

Stuck windows can also be the result of an unintentional break or loosening of the pulleys that are used to lift and lower the window. These components may lose tension and cause obstruction particularly when the window is two or more stories higher than the ground.

If you're having difficulty opening the window try using a pry bar to gently push the window to open a bit at a time. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the reason for windows that don't lift or lower. Depending on who manufactured the windows, you'll be required to refer to the owner's manual for additional instructions.

If you've tried cleaning the moving parts of your windows and then lubricating them but they're still not opening It could be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows slide from functional to inoperable, as a window that isn't properly shut can expose your home to burglary and water damage. Contact our team for more information on our replacement windows and services today!